Decoiling-Sheet guiding-Roll forming-Measure length-Cutting-Panels to product stand
|Name||Rolling shutter door making machine roll forming machine price
|Suitable Material||Colored or galvanized steel coil, HRB60 or equivalent|
|Thickness Range||0.3-0.8 mm|
|Coil Width Range||
According to your actual drawing.
according to your need.
|Cutting||Automatically stop and cutting when it comes to the set length.|
|Length of the Sheet||
You can set the length according to your need.
It is controlled by PLC
length accuracy: ±1mm.
Loading capacity: 5T
Inner diameter: 470-530mm
Steel coil width :914, 1000, 1220, 1250 mm.According to your actual drawing.
Working speed: 0-15m/min, adjustable
| Cutting system
Material of blade :Cr12MOV, much better than normal Cr12 material
Hydraulic power :3KW
| Feeding table
It is used to control the width and position of the steel sheet.
The sheet is quided into the machine with correct position ,to make sure the panel is neat and parallel
According to your actual drawing
Material :350 H steel
Feature:more table, no shaking
Following items explains some advantage of our machines .
Motorized cutting is 3 times faster than traditional hydraulic cutting.
you will greatly improve your actual production speed. motorized cutting has the following advantages.
1. Easy maintenance. no extra hydraulic pipes to make it a mess
2. Low noise. the hydraulic station keeps working even it is not cutting.
3. Clean. No worry for oil leaking and make your factory dirty
This fast drive improves speed to 25m/minute from normal 10 m per minute (not include cutting).
Increase your production speed for quick delivery to your customers.
the other benefit for high speed is to reduce labor cost. Now you can reduce
50% working time, and save 50% worker salary.
Our feeding table is curved design. So the panel will be folded marks when feeding into machine.There is hand wheel to adjust the steel bar, so you can adjust for different width easily.
1. what is your guarantee period?
Guaranteed against malfunctions due to manufacturing defects for 12 months from the date of loading.
2. Do you provide training for my workers?
The machine has been installed and tested well before shipping. It is easy to operate.
Normally speaking, our customer follows the instruction book and can operate the machine well.?
You can also come to our factory to check the machine and learn how to operate before shipping. It only needs 2 hours and you can operate well.
3. I do not know about the machine and do not know how to install it. Can you install the machine in my factory?
If you need us to send engineers to your factory, you will pay for the travel expense such as visa, round tickets, hotel, food Salary of 80 USD per day per person (from departure from our factory, until we are back to our factory). You also need to take care of his safety.
4. What is included in the machine?
The process for work: decoiler→feeding→roll forming→measuring length→cutting to length→product to stand
The whole line includes a manual decoiler, roll forming machine and product stand. when you get the machine in your factory, you just need to do following 3 things, and then you can start working.
a. Put the machine on the flat level ground.
b. Inject gear oil and hydraulic oil.
c. Connect 3 phase electric wire.